Filter
Top Products
13User manual
docking slot of the docking station and press
it down firmly until it locks.
Press and hold the pairing key 3
[PAIRING] on
the receiver module for 3 seconds.
The receiver module enters pairing mode, and •
the pairing key starts to flash blue quickly.
If the connection succeeds, the wireless •
connection indicator on the SpeechMike and
the pairing key on the receiver module glow
blue permanently.
Set up the wireless connection 3.7.2
manually using the receiver module
If the receiver module is used without the
docking station, follow these steps to set up the
wireless connection manually.
Ensure that the receiver module is 1
connected to the computer with the USB
cable and that the computer is switched on.
Press and hold the pairing key 2
[PAIRING] on
the receiver module for 3 seconds.
The receiver module enters pairing mode, and
the pairing key starts to flash blue quickly.
Switch on the SpeechMike and press the 3
function keys
F1 and F3 simultaneously for 1
second.
Turning on/o the SpeechMike3.6
To turn on the SpeechMike, press and hold 1
a On/O for about 5 seconds. The battery
indicator will light up.
Once turned on the SpeechMike will 2
reconnect automatically to the docking
station.
The wireless connection indicator on the •
SpeechMike flashes blue while the connection
is being established.
If the connection succeeds, the blue indicator •
lights permanently.
If the automatic wireless connection fails, set •
up the connection manually (see below).
To turn o the SpeechMike, press and 3
hold a On/O for about 5 seconds. The
SpeechMike beeps, and the battery indicator
will light up red briefly.
Set up the wireless connection 3.7
manually
The SpeechMike and the receiver module are
paired by factory default and usually do not not
need to be connected manually. If the automatic
wireless connection fails or if you want to pair
the SpeechMike with another receiver module,
set up the connection manually.
Set up the wireless connection 3.7.1
manually using the docking station
Ensure that the receiver module is inserted 1
in the docking station.
Switch on the SpeechMike, insert it into the 2
ENGLISH