Filter
Top Products
36 Philips · Laserfax 5120 · 5125 · 5135
EN
9Settings
Modifying the Basic Settings
Cursor Navigation 6
Prints the Lis t of Settings
Set Up Power Saving Func-
tion
Set Up Power Saving Function
You use this function to set after what period of time the
device switches to power saving mode following the print
job. Whenever you receive a fax or if you would like to
print or make a copy, your device will automatically switch
back from its energy saving mode to its operating mode.
1 Press ECO.
2 Using [ select
POWER SAVE.
3 Confirm with OK.
4 Select the time (in minutes) after which the device
should switch to power saving mode using [. Select
0 if the device should switch to the power saving func-
tion immediately after a print job.
5 Confirm with OK.
Set Up Toner Saving Func-
tion
Set Up To ner Saving Function
You use this function to switch on the toner saving func-
tion. The print appears a little paler, thereby increasing the
number of pages that you are able to print with one toner
cartridge.
1 Press ECO.
2 Using [ select
TONER SAVE.
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
Selecting the Country
Setting the Cou ntry Correctly
1 Press OK, 031 and OK.
2 Use [ to select the country in which you are operat-
ing the device.
3 Confirm with OK.
Selecting the Language
1 Press OK, 033 and OK.
2 Use [ to select the desired display language.
3 Confirm with OK.
Spaltenumbruch
Entering the Date and Time
1 Press OK, 011 and OK.
2 Enter the date (two digits for each field), for example
31¦05¦25 for May 31th, 2025.
3 Enter the time, e.g. 14 00 for 2 pm.
4 Confirm with OK.
Set the Time Zone
UTC
Coordinated Universal Time (UTC) is the current stand-
ardised universal time format used. Starting from Green-
wich in London (Zero Meridian), the world is split into
time zones. These time zones are indicated with a deviance
from UTC (in hours) for instance UTC+1 for Central
European Time (CET)
Set the Time Zone
In countries with several time zones, you can select from
preset time zones or enter the deviance of your time zone
from UTC. In countries with one time zone, the setting is
automatically adjusted if you set country correctly (see also
chapter Selecting the Country, page 36).
Notice
Modifying the Basic Settings
The changed settings are stored as new default
settings. If you select a special function for a
one-time process, take care to restore the default
settings or factory settings after that.
Notice
Navigating in the Menu
You can move the cursor using [. Press C to
return to the previous menu level. Press j to
close the menu and return to the starting mode.
Notice
Help Button
You can also obtain a list of all the settings by
pressing ¨. Using [ select
SETUP. Confirm
with OK.
Notice
Access Function
You can also call the function by pressing
OK, 0021 and OK.
Notice
Access Function
You can also call the function by pressing
OK, 0022 and OK.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are oper-
ating the device. Otherwise your device is not
adapted to the telephone network. If your coun-
try is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.
lpf-5120-5125-5135-manual-uk-int-253117544-b.book Seite 36 Mittwoch, 16. Dezember 2009 10:01 10