Filter
Top Products
SMS 19
EN
4 Using [ select the SMS that you would like to print.
SELECTED—Using [ select the message that you
would like to print.
NEW—Prints all unread SMS messages
ALL—Prints all received SMS messages
5 Confirm with OK.
Deleting SMS Messages
SMS Deletion Introduction
Your device can store up to 30 SMS messages. If the mes-
sage memory is full, the device cannot receive any more
messages. Delete SMS messages to free up memory.
1 Press OK, 33 and OK.
2 Using [ to select the SMS message you would like to
delete.
SELECTED—Using [ select the SMS that you would
like to delete.
ALREADY READ—Deletes all read SMS messages
ALL—All SMS messages will be deleted.
3 Confirm with OK.
Modifying the Settings
Cursor Navigation 6
Changing Transmitting and Receiving
Numbers
Numbers of the SMS Center
All numbers that you need to send and receive SMSs are
stored in your device. In case you moved to another tele-
phone service provider, you must change these numbers.
You can also receive SMS messages through a second serv-
ice provider.
1 Press OK, 36 and OK.
2 Using [ select
SMS CENTER 1.
3 Confirm with OK.
4 Using [ select
SEND No.
5 Confirm with OK.
6 Enter the number for sending SMSs.
7 Confirm with OK.
8 Using [ select
RECEIVE No.
9 Confirm with OK.
10 Enter the number for receiving SMSs.
11 Confirm with OK.
Sending the Sender’s Name
Sending the Sender’s Name
You can set whether or not your name should be sent with
each SMS message—identifying you as the sender. You
can enter and save you name with the function 14 (also see
chapter Entering Your Telephone Number and Name,
page 26).
1 Press OK, 35 and OK.
2 Using [ select
SENDER NAME.
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
Switching Notification Tone On/Off
Switching Noti fication Tone On/Off
You will hear a notification tone whenever an SMS mes-
sage has arrived. You have the option of turning this func-
tion off.
1 Press OK, 35 and OK.
2 Using [ select
BEEP SMS.
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
Switching Automatic Printing On/Off
Automatic Printi ng
You can deactivate the automatic printing of SMS messag-
es.
1 Press OK, 35 and OK.
2 Using [ select
AUTO PRINT.
3 Confirm with OK.
4 Use [ to select whether you would like to turn the
function on or off.
5 Confirm with OK.
Sending Text2Fax
(in countries a nd networks without SMS funct ion)
(in countries and networks without SMS func-
tion)
Text2Fax
You can enter text on your device and send as a fax trans-
mission to another device
1 Press _.
2 Enter the desired number using the numeric keypad or
select a saved entry.
3 Enter the text using the letter keypad. You can enter a
maximum of 70 lines of 80 characters each—a total of
5.600 characters.
4 Press _. The message is sent.
You can move the cursor using [. Press C to return
to the previous menu level. Press j to close the
menu and return to the starting mode.
You can also receive SMS messages through a sec-
ond service provider. Select
SMS CENTER 2.
Modify the number for receiving SMS as de-
scribed under step 10.
Enter capital letters by pressing and holding ú
button. You can enter special characters using ½.
You can enter a line break using Rø.
To insert special characters and symbols, press
;ü. Press ûü to insert language specific special
characters. Select with [. Confirm with OK.
You can move the cursor using [. Use C to de-
lete individual characters. Press COPY to print
the message before sending it.