Philips LPF 925 Fax Machine User Manual


 
38 Philips LPF 920 · 925 · 935 · 940
EN
Apart from all legal obligatory rules, Sagem Communica-
tions, do not give any Guarantee, either implicit or explicit
which is not set force in the present section, and could not
be hold responsible for any direct or indirect, material or
immaterial damage, in or out of the frame of the present
guarantee.
If any provision of this guarantee shall be held to be in
whole or in part invalid or illegal due to an obligatory rule
applicable to consumers pursuant to their national legisla-
tion, such invalidity or illegality shall not impair or affect
the remaining provisions or parts of this guarantee.
This guarantee does not affect the Customer statutory
rights.
B) Exclusions From Guarantee
Sagem Communications shall have no liability under the
guarantee in respect of:
•) Damage, defects, breakdown or malfunction due to one
or more of the following:
– Failure to properly follow the installation process and in-
structions for use
– An external cause to the equipment (including but not
limited to: lightening, fire, shock, vandalism, inappropri-
ate conditions of electrical network or water damage of any
nature)
– Modifications made without the written approval of
Sagem Communications
– Unsuitable operating conditions, particularly of temper-
ature and humidity
– Repair or maintenance of the equipment by persons not
authorized by Sagem Communications
•) Wear and tear from normal daily use of the equipment
and its accessories
•) Damage due to insufficient or bad packaging of equip-
ment when returned to Sagem Communications
•) Usage of new versions of software without previous ap-
proval of Sagem Communications
•) Work on any equipment or software modified or added
without the prior written consent of Sagem Communica-
tions
•) Malfunctions not resulting from the Equipment or from
software installed in user workstations for the purpose of
use of the equipment.
Communication problems related to an unsuitable envi-
ronment including:
– Problems related to access and/or connection to the In-
ternet such as interruptions by access networks or malfunc-
tion of the line used by the subscriber or his correspondent
– Transmission faults (for example poor geographical cov-
erage by radio transmitters, interference or poor line qual-
ity)
– The local network fault (wiring, servers, workstations) or
the failure of the transmission network (such as but not
limited to interferences, fault or poor quality of the net-
work)
– Modification of the parameters of the cellular network
carried out after the sale of the Product
•) The normal servicing (as defined in the user guide sup-
plied with the equipment) as well as malfunctioning due to
servicing not being carried out. Servicing costs are in any
event always borne by the customer.
•) Malfunctions resulting from the usage of products, con-
sumables or accessories not compatibles with the equip-
ment.
C) Out of Guarantee Repairs
In the cases set forth in B) as well as after expiry of the guar-
antee period, the customer must ask the Authorized Sagem
Communications Repair Centre for a cost estimation.
The repair and delivery costs will be invoiced to the cus-
tomer.
The foregoing shall apply unless otherwise agreed in writ-
ing with the customer and only for the the United King-
dom.
Helpdesk: 08 71 - 075 07 11
The CE symbol confirms conformity with the EU direc-
tives that apply to the device.
Declaration of Conformity (DoC)
Hereby, Sagem Communications Austria GmbH
declares that this LPF¦920, LPF¦925, LPF¦935,
LPF¦940 is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
WWW
You can find the complete Declaration of Conformity on
our website www.sagem-ca.at/doc
Energy Star 2007
Energy Star
As a participant in the ENERGY STAR programme,
Sagem Communications Austria GmbH has made sure
that this machine complies with the ENERGY STAR re-
quirements.
Environment
Environment: Respect of environment is a key objective
of Sagem. Sagem uses environmentally friendly processes
to run its operations and has chosen to integrate strong en-
vironmental constraints in the full lifecycle of its products
including manufacturing, product use and end of life.
Recycling
Packaging: To facilitate packaging recycling, please con-
form to your local selective recycling rules.
Batteries: Old batteries have to be deposited in designat-
ed collection areas.