Filter
Top Products
25
MCL1801
OSD Position
OSD Size
OSD Transparency
Exit
OSD Timeout
OSD Settings
10 Sec.
20 Sec.
30 Sec.
60 Sec.
45 Sec.
OSD Timeout
90 Sec.
120 Sec.
Disabled
6.5.5 OSD Transparency
1) Press Enter button when the OSD Transparency is highlighted on OSD Settings.
The OSD Transparency bar appears.
2) Press Enter button and Adjust + or Adjust - button to choose the degree of transparency of the OSD image
3) When the position is adjusted, press the Enter button to return to OSD Settings window
4) Select Exit and press again Enter button to return to OSD Main Menu.
6.5.6 OSD Timeout
1) Press Enter button when the OSD Timeout is highlight on OSD Settings.
The OSD Timeout bar appears.
2) Press Enter button and Adjust + or Adjust - button to choose the time of activation of the OSD-Menu.
3) Press the Enter button to confi rm your selection and return to OSD Settings windows.
6.6.0 Video Source
The ON SCREEN DISPLAY shows the four sources available.
The default is - DSUB
(*)
(D-sub input Video with separated syncr.).
but you can select:
- DSUB-SOG (D-sub input Video with Syncr. On Green)
- DVI (Digital Video Input)
1) Press Enter button when the Video Source is highlighted on Main menu.
The Video Source window appears.
2) Press the Adjust + or Adjust - button until the desired source is highlighted.
3) Press the Enter button to confi rm your selection and exit from OSD Main Menu.
DVI
DSUB (Ht. and Vt. Sync.)
Exit
DSUB-SOG (Green Input)
Video Source
(*) see next page