Filter
Top Products
I
NSTALLING
Y
OUR
D
RIVE
2
5
audio) connector, labeled “Audio.” The
unlabeled jumpers on both models are for
factory testing only.
6.
Plug a free IDE connector inside your PC into the
drive’s
socket. The cable’s colored
edge must be aligned with the Pin 1 position.
Note:
If you have a sound card that has an IDE port,
you can either connect the CD-ROM drive to
your PC or to the sound card. You must then
disable the unused secondary IDE port. See
Appendix A for what a secondary IDE port is
and refer to your sound card, PC or IDE
controller manual for the instructions on
disabling the unused secondary IDE port.
7.
If you have a sound card with a 4-pin CD-ROM audio
connector, use the supplied audio cable to connect
it to the drive’s “
” connector (the
“
” connector on PCA103CD).