Philips PXG10 Projector User Manual


 
8. OPERATION Graphical User Interface
DATA MODE MENU CONTROL
1. Press Menu to display the Data mode menu bar.
2. Press 1 / 2 to select an adjustment menu on the menu
bar.
3. Press 3 / 4 to select a specific adjustment item.
4. To display a single adjustment item, press OK after
selecting the item. Only the menu bar and the selected
adjustment item will appear.
5. Press 1 / 2 to adjust the item.
6. Press Menu to exit from the GUI.
VIDEO MODE MENU CONTROL
1. Press Menu to display the Video mode menu bar.
2. Press 1 / 2 to select an adjustment menu on the menu
bar.
3. Press 3 / 4 to select a specific adjustment item.
4. To display a single adjustment item, press OK after
selecting the item. Only the menu bar and the selected
adjustment item will appear.
5. Press 1 / 2 to adjust the item.
6. Press Menu to exit from the GUI.
15
English
USING THE GUI (GRAPHICAL USER INTERFACE) MENU SCREENS
This projector has two sets of menu screens (Data/Video) that allow you to adjust the image and various projector settings.
These menu screens can be operated from the projector or the remote control with the following buttons.
Note:
The On Screen Displays will automatically disappear when no changes have been made within 30 seconds.
LANGUAGE SELECTION
English is the default setting language for the On-screen
Display. It can be changed to German, Spanish, Dutch, French,
Italian, Swedish or Portuguese.
1. Press Menu.
The menu bar appears on the screen.
2. Press 1 / 2 to select “Language”.
3. Press 3 / 4 to select the desired language.
4. Press OK to save the setting. The On-Screen Display is now
programmed to display in the language selected.
5. To exit from the GUI, press Menu.