Filter
Top Products
AV Mute Function
This function can be used for muting the sound of the
projector (or an external connected sound amplifier) and for
muting the picture.
Press A/V Mute.
–“AV Mute” is displayed on the screen.
To return to the original projected image, press A/V Mute again.
Turning off the On-Screen Display (OSD)
The On-screen Display (“AV Mute”) that appears during mute
screen can be turned off. When “AV Mute Disp” is set to
“” in the GUI menu, “AV Mute” will not be displayed during
function.
1.
Press Menu.
2.
Press 1 / 2 to select “Options”.
3.
Press 3 / 4 to select “AV Mute Disp”.
4.
Press 1 / 2 to select “” to turn on or “” to turn off
the function.
5.
To exit from the GUI, press Menu.
On-Screen Display Override Function
This function allows you to turn off the on-screen messages
that appear during “input select”. Once “OSD Display” is set to
“” in the GUI menu, the on-screen messages will not
appear when Data 1, Data 2 or Video are pressed on the
projector or Input on the remote control.
1.
Press Menu.
2.
Press 1 / 2 to select “Options”.
3.
Press 3 / 4 to select “OSD Display”.
4.
Press 1 / 2 to select “” to turn on or “” to turn off
the On-Screen Display.
5.
To exit from the GUI, press Menu.
Economy mode
This function allows you to reduce the power consumption
when the projector is off.
Economy Modes
Selected mode Automatic Power RS232C/Monitor
Shutoff out
Mode 1 ON OFF
Mode 2 ON ON
Mode 3 OFF OFF
Mode 4 OFF ON
Note:
The projector is factory preset to Mode 2.
1.
Press Menu.
2.
Press 1 / 2 to select “Options”.
3.
Press 3 / 4 to select “Economy Mode”, and then press 2.
4.
Press 3 / 4 to select the desired mode.
5.
Press OK to save the setting.
6.
To exit from the GUI, press Menu.
22
8. OPERATION Other settings
English