Filter
Top Products
18
Identifi cation service (CLI).
Please contact your network
provider for more information
on this service.
To answer the second call,
press
.
4.1.6 Call from the call log
1 Press .
The fi rst entry in the call log
is displayed.
2 Scroll or to the
entry you want.
3 Press to dial the
number.
Note
You need to subscribe to
your network’s Caller Line
Identifi cation service to be able
to see the caller’s number in
the call log. See ‘Call log’ on
page 25 for more details.
4.1.7 Answer a call
1 The phone rings and
fl ashes in the display. Press
or press to answer
the call via the loudspeaker.
Warning
When the phone is ringing, avoid
holding the earpiece too close to
your ear as it may damage your
hearing. Handsfree activation can
suddenly increase the volume in
the earpiece to a very high level.
Make sure the handset is not too
close to your ear.
Tip
If Auto pick-up mode is on
(see page 32), simply lift up the
handset from its base to answer
the call. The default setting is
off, in which case you will need
to press
to answer a call.
Note
An incoming call has priority
over other events. Whenever
there is an incoming call, other
status in progress such as
phone setting, menu navigation,
etc. will be aborted.
4.1.8 Adjust volume
1 During a call, press or
to adjust the earpiece
or loudspeaker volume.
The volume level is shown in
the handset display.
Using your SE245