Filter
Top Products
45
3 Scroll to
BS
SCREENING
and press .
4 Press or to select
ON
or
OFF
.
5 Press to confi rm.
10.10 Memory full
The memory is full if there
is less than 15 seconds of
recording time left or if the
maximum total of 59 messages
has been reached.
When the memory becomes
full :
• The LED indicator on the
base fl ashes quickly.
•
fl ashes quickly on the
handset display.
• The machine will
automatically switch to
Answer Only mode.
If the memory becomes full
while a caller is leaving a
message, they will hear a beep
and the call is ended.
At the base :
1 When a caller is leaving a
message, press
or
to adjust the volume to
listen to your caller.
2 To interrupt and take the
call on the handset, press
or .
10.9.1 Switch handset call
screening on/off
1 Press scroll to
ANSW MACHINE
and press
.
2 Scroll to
ANSW
SETTINGS
and press .
3 Scroll to
HS
SCREENING
and press .
4 Scroll or to select
ON
or
OFF
.
5 Press to confi rm.
10.9.2 Switch base station
call screening on/off
1 Press scroll to
ANSW MACHINE
and press
.
2 Scroll to
ANSW
SETTINGS
and press .
Using your answering machine