Filter
Top Products
5
2 Your UPS
electronics and computer system.
Product highlights
Your UPS is equipped with the following
features and functions.
Intelligent microprocessor control
Your UPS is a microprocessor-controlled unit. This
means that it operates with the newest technology for
high performance and powerful functionality. It is an
“intelligent” protector that provides pure, reliable AC
power to critical loads — guarding against electri
-
cal power blackouts, current fluctuations, surges and
interference. The UPS will also save power, automatically
turning off under back-up mode when none of the con-
nected equipment is operating. Utilizing microprocessor
control maximizes your UPS’s system flexibility and
ensures reliability.
Advanced battery management
Visual and audible signals alert you about UPS and
battery status. The self-test function allows the UPS to
detect a weak battery before it is put into service. Your
UPS will perform a self-test upon start-up.
Automatic voltage regulation
Allows the UPS to adapt to a wide power range and
maintain a steady output of pure and reliable power to
sensitive, connected equipment.
Automatic frequency sensing
Allows the UPS to automatically match frequency with
the incoming utility power.
High level battery charger
Fully charges the internal battery and acts to prolong
its life.
Overload protection
Guards against connecting components whose power
requirements exceed that of the UPS. Functions in both
in-line and battery modes.
Extended back-up time
Prolongs the time your equipment has electricity during
power blackouts.
Solid State phone/fax/modem protection
Provides maximum protection against surges present on
standard two-wire “dial-up” phone service.
Splitter phone line protection
Splits incoming phone line into two outputs, supporting
and protecting phone and modem.
Coaxial cable protection
Provides maximum protection against surges present on
standard coax/broadband lines.
Rotating LCD message panel display
Displays time, AVR operation indicator, battery charge
level (in AC mode), battery run time (in back-up mode),
input voltage and battery load level. May be positioned
horizontally or vertically.
2.1 What’s in the box
• UPS
• 6 ft RG6 coaxial cable
• 6 ft phone cord
• 6 ft RJ45 cable
• 8 ft power cord with offset, right angle plug
• (2) Adjustable rack mount brackets
• Owner’s manual
• Advanced power monitoring software with auto
shutdown
2.2 What you’ll also need
• A 3-wire grounded AC outlet to supply power to the
UPS
• A pointed tipped implement, such as a pen
• All equipment being connected to the UPS