Pioneer DVD-R7322 Computer Drive User Manual


 
4
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your
model properly.
This product is an optional drive designed for exclusive use as the 700-disc changers,
models DRM-7000. This means that this unit cannot be used alone or connected to other
equipment than specified.
Pioneer may not be held liable for the loss of any data or any other direct or indirect
damage suffered as the result of the use or breakdown of this product. It is strongly
recommended that regular backups be taken of all critical data.
IMPORTANT NOTICE:
RECORD THE MODEL NUMBER AND
SERIAL NUMBER OF THIS
EQUIPMENT BELOW. THE NUMBERS
ARE ON THE TOP PANEL.
MODEL NO. DVD-R7322
SERIAL NO.
KEEP THESE NUMBERS FOR
FUTURE USE.
For U.S. model
INFORMATION COMPLYING DHHS RULES IS MARKED ON THE TOP COVER AS
FOLLOWS:
DANDERVISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
IMPORTANT
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IMPORTANT
CAUTION
This product contains a laser diode of higher
class than 1. To ensure continued safety, do not
remove any covers or attempt to gain access to
the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on
your unit.
Location: on top of the cover
For pluggable equipment the socket-outlet shall be installed near
the equipment and shall be easily accessible.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
The Generation of Acoustical Noise Is Less
Than 70dB.(ISO7779/DIN45635)