Filter
Top Products
6
En
SAFETY INSTRUCTIONS
Disc-related
7 Recommended Discs
÷ For stable recording and playback,
always use a recommended brand of
disc.
÷ For specific disc recommendations,
consult your dealer or the Pioneer
website.
÷ Avoid touching or scratching the signal
surface (shiny side) of the disc
÷ Hold the disc by the edges or by the
center hold and one edge
÷ Do not affix paper or labels to the disc
÷ Discard warped or
cracked discs as
they may cause
damage to the
drive
÷ Avoid specially
shaped discs such
as hearts or
polygons
÷ Remove dust or
lint from the disc
with a soft cloth
by wiping from
the inside to the
outside edge rather than in a circular
motion
÷ Do not use record-cleaning or anti-static
agents as the solutions may cause
damage to a disc
Discs for Recording
7 When data cannot be recorded or
errors occur during recording:
÷ Are you using a recommended brand
of disc?
÷ Has a sufficiently large writing area
been secured?
÷ Are you using a disc that has already
been finalized (closed to further
recording)?
÷ Has the disc been inserted correctly
with its label side facing up and writing
side down?
÷ Is the disc dirty or scratched?
7 The device cannot read a disc that
has been recorded.
÷ Are you using a recommended brand
of disc?
÷ Is an unwritten disc installed?
÷ Is the disc dirty or scratched?
÷ It is possible that condensation has
formed on the optical components or
on the disc. (Wait 1 to 2 hours before
attempting to use the device again.)
* For other issues, consult the operating
instructions accompanying your
application software.
INSTALLATION-RELATED PRECAUTION
Be sure to remember the following points during the installation of your DVD-R7322.
÷ A maximum of four DVD-R7322s can be connected to the “DRM-7000” 700-disc
changer.
÷ The DVD-R7322 may not be used together in conjunction with a “DRM-PW701”
power supply unit.
÷ This drive may be installed in drive vays 1 to 8.