Filter
Top Products
B700 Installation Instructions
Page 9
6
4
a. If you want to accept the default value displayed by the meter, press Enter and go
to step d. To enter a different postage value, go to step b.
b. Use the number keys to type in the postage value you want. For example, to key in
64¢, press:
You don’t have to type a decimal point. The meter automatically adds it.
c. Press
Enter to confirm the postage value. The three bars on either side of the postage
display tell you the meter is ready to print postage as shown below.
d. Place your envelope on the transport
face up and push it against the rear wall of the
meter. Slide the envelope to the right until its lead edge touches the trip mark on the
feed deck. See the figure at the bottom of the previous page.
e. The meter senses the presence of your envelope, then conveys it into the print area
and out to the stacker.
f. You can insert the next envelope as soon as the previous one enters the stacker.
8. Printing Postage
9. Place the Quick Refer-
ence Guide in the Meter
The Quick Reference Guide in-
cluded with your documentation
package provides brief step-by-step
instructions for the procedures you’ll
use most often. Place the guide in
the cassette compartment as shown
in the accompanying figure.
Quick
Reference
Guide
B700 Installation 8/18 REV A 05/13/97, 1:17 PM9