Filter
Top Products
Selecting the Source
m70L Installation & Configuration Guide 25
Selecting the Source
Selecting the source means choosing the input connector from where the picture is
coming. Selecting the source (picture) manually is usually quicker than using the
SOURCE button.
You’ll choose from the connectors shown in the table below, depending on whether
your display has the optional VIM installed.
Connect the power cord and turn on the power switch. If the power was already on,
and the backlights are off, press the ON button on the remote.
Source Connectors
Without VIM With VIM
Analog Analog
Digital Digital
Component
S-Video
Composite
SD/HD SDI
Digital
input
Analog
input
Digital
loop-
through
With VIM