Filter
Top Products
Saving and Recalling Configurations
72 m70L Installation & Configuration Guide
What the Memories Store
The following settings can be stored in a memory slot and recalled when needed:
• Selected source
• Resolution (and much more about the signal)
• Frequency
•Phase
• Sharpness
• Position and size (zoom settings)
• Everything in the WALL & ASPECT RATIO menu
• Brightness, Contrast, Hue and Saturation for video sources
All of this is stored separately for each memory slot. As an example, you could store
multiple different wall setups and switch between them quickly.
Global Storage
The following settings are stored globally; that is, they are stored at the display level
and are the same for all memory slots.
• Everything in the MISCELLANEOUS menu
• Everything in AUTO SETUP OPTIONS
• Everything in MENU OPTIONS
• All the HOURS settings
• All the COLOR BALANCE settings
Memory: What Is Saved? And Where?
In the display, some parameters (values) are associated with the mode. The mode is
primarily the horizontal and vertical resolution and the vertical frequency of the
incoming source picture. It is more than that, but if you think of it this way, you will be
close enough. Some parameters are associated with the input. The input in this
instance means the input connector: Analog, digital, composite video, etc. The
parameters specific to mode and input are saved in memory slots.