Filter
Top Products
PLANET ADE-4120 ADSL Firewall Router
18
creating with your ADSL Router. Unless you have specific internal needs or in the router
mode, there should be no reason to change these values.
Please check with your ISP to see if you need to enter Router & Domain Names to be
viewed by your ISP's network. If you do, click on your Start button. Choose Control
Panel, then double-click the Network icon. Choose the Identification tab. There will be a
Computer Name and a Workgroup name displayed here. Enter the Computer Name
into the Router Name box on the Setup Page, and enter the Workgroup name into the
Domain Name box on the Setup Page.
After you complete the settings of this page, click “Next” to continue.
3.6.2.3 Setup 3 WAN parameters
These values refer to the outside network you connect to every time you access your
Broadband Internet connection. Most ADSL ISPs assign their clients with a different IP
address via PPPoE or PPPoA each time they log on. If this is the case with your ISP,
you should set PPPoE+NAT or PPPoA+NAT mode at previous step 1. You can setup
PPPoE or PPPoA activity time, the router will log off when the idle time up. Click “Next”
to continue.