Filter
Top Products
PLANET ADE-4120 ADSL Firewall Router
2
LAN site and automatic switching between MDI and MDI-X for 10Base-T and 100Base-
TX ports is supported.
Multi-Protocol to Establish A Connection: Supports PPPoA (RFC 2364 - PPP over
ATM Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged or routed) and
PPP over Ethernet (RFC 2516) to establish a connection with the ISP. The product also
supports VC-based and LLC-based multiplexing.
Network Address Translation (NAT): Allows multi-users to access outside resource
such as Internet simultaneously with one IP address/one Internet access account.
Firewall: Supports SOHO firewall with NAT technology. The packet filtering is also
supported for filter packets based on IP, MAC address and URL keywords.
Dynamic Domain Name System (DDNS): The Dynamic DNS service allows you to
alias a dynamic IP address to a static hostname. This dynamic IP address is the WAN
IP address. For example, to use the service, you must first apply an account from this
free Web server http://www.dyndns.org/.
PPP over Ethernet (PPPoE): Provide embedded PPPoE client function to establish a
connection. Users can get greater access speed without changing the operation
concept, sharing the same ISP account and paying for one access account. No PPPoE
client software is required for the local computer. The Always ON, Dial On Demand and
auto disconnection (Idle Timer) functions are provided too.
Virtual Server & DMZ: Users can specify some services to be visible from outside
users. The router can detect incoming service request and forward it to the specific local
computer to handle it. A DMZ host setting is also provided to a local computer exposed
to the outside network, Internet.
Rich Packet Filtering: Not only filters the packet based on IP / MAC addresses, but
also based on Port numbers.
Dynamic Host Control Protocol (DHCP) client and server: In the WAN site, the
DHCP client can get an IP address from the Internet Server Provider (ISP) automatically.
In the LAN site, the DHCP server can allocate up to 253 client IP addresses and
distribute them including IP address, subnet mask as well as DNS IP address to local
computers. It provides an easy way to manage the local IP network.
Static and RIP1/2 Routing: Supports an easy static table or RIP1/2 routing protocol to
support routing capability.
SNTP: An easy way to get the network real time information from an SNTP server.
Web based GUI: supports web based GUI for configuration and management. It is
user-friendly with an on-line help, providing necessary information and assist user
timing. It also supports remote management capability for remote users to configure
and manage this product.
Rich management interfaces: Supports flexible management interfaces with local
console port, LAN port, and WAN port. Users can use terminal application through
console port to configure and manage the device, or Telnet and WEB GUI through LAN
or WAN ports to configure and manage a device.