Filter
Top Products
5
Chapter 2
Installation
This Chapter covers the physical installation of ADW-4100.
System Requirements
• PC or TCP/IP compliant workstations
• 32 MB RAM
• Ethernet Network Interface Controller (NIC) RJ45 Port
• Internet Browser
Installation Procedure
Figure 2-1: Installation Diagram
Step 1
Choose an Installation Site
Select a suitable place on the network to install ADW-4100. Ensure ADW-4100 is
powered OFF.
Step 2
Connect LAN Cables
Use standard LAN cables to connect PCs to the LAN port on ADW-4100. Either
10BaseT or 100BaseT connections can be used.
Step 3
Connect WAN Cable
Connect one end of the RJ-11 phone cord to the LINE port on your ADSL modem.
Connect the other end of the RJ-11 phone cord to your wall phone jack.
Step 4
Power Up
2