Filter
Top Products
ADW-4100 User Manual
30
Chapter 5
PC Configuration
This Chapter details the PC Configuration required on the local
("Internal") LAN.
Overview
For each PC, the following may to be configured:
• TCP/IP network settings
• Internet Access configuration
Windows Clients
This section describes how to configure Windows clients for Internet access via
ADW-4100.
The first step is to check the PC's TCP/IP settings.
ADW-4100 uses the TCP/IP network protocol for all functions, so it is essential that
the TCP/IP protocol be installed and configured on each PC.
TCP/IP Settings
If default ADW-4100 settings are loaded, and default Windows 95/98/ME/2000
TCP/IP configuration, no changes need to be made.
• By default, ADW-4100 will act as a DHCP Server, automatically providing a
suitable IP Address (and related information) to each PC when the PC boots.
• For all non-Server versions of Windows, the default TCP/IP setting is to act as
a DHCP client.
• If you wish to check your TCP/IP settings, the procedure is described in the
following sections.
5