Filter
Top Products
ADW-4100 User Manual
16
Fixed IP for WAN
If your ISP has assigned static IP address, you may connect to the Internet by using
a fixed, or static address. To set up a Fixed IP for WAN, do the following steps as
an example.
Step 1
Enter the information of Static IP Address, Subnet Mask and Gateway provided
by ISP. Note: These parameters are required for building up connection. If one of
these information incorrect or unavailable, please contact your ISP for correct
information.
Figure 4-9: Fixed IP set-up screen
Step 2
Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/
Routed Mux, Classical IP over ATM). And Disable “Bridge” function.
Step 3
Click “submit” to commit modifications you’ve done, then click “Save Configura-
tion” to store settings. (Modifications will not take effects until next reboot.)
Step 3
Click on “NAT” tab on left panel, and enable the NAPT function in the option menu.
Step 4
Click “Save settings” on left panel to write configuration into machine, and reboot
to make settings effective.
Dynamic IP for WAN
If ISP provides a dynamic IP for Internet connection, following steps illustrate how
to enable the connection via ADW-4100.
Step 1
Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/
Routed Mux, Classical IP over ATM). And Disable “Bridge” function.
Step2
Check the DHCP option, and fill in the Host Name field (if required.) (This informa-
tion should be obtained from ISP. If there is no special demand for this, leave this
column blank.)