Filter
Top Products
9
Front Panel LED definition
LED
State
Description
ON
When the router is powered on and in ready state
PWR
OFF
When the router is powered off.
WLAN
Flashing
When wireless AP is ready
ON
Successful connection between ADSL modem and telecom's
network
ADSL
Flashing
Modem is trying to establish a connection to telecom’s network
ON
Link
Flashing
TX or RX activity
LAN
1-4
OFF
No Link
These four LAN (Local Area Network) ports are where you will
connect networked devices, such as PCs, print servers remote hard
drives, and anything else you want to put on your network
Rear Panel
Rear panel Port and Button Definition
Connector
Description
POWER
Power connector with 12V AC 1.0 A
POWER
Button
The power button is for turn on or turns off the router.
ADSL
Connector
The RJ-11 connector allows data communication between t
he modem and
the ADSL network through a twisted-pair phone wire
LAN (1-4)
Router is successfully connected to a device through the corresponding
port (1, 2, 3, or 4). If the LED is flashing, the Router is actively sending or
receiving data over that port.
Reset
Button
The reset button, the router restore the default settings when press this
button until reboot