Filter
Top Products
12
13
3.3.3 Set up the workgroup and uplink to the backbone (Model: FSD-
1600/1601)
Figure 3-3 Connection with VLAN enable
Turn on the DIP 4, the FSD-1600 soon separate the fourteen ports (Port 1 to Port 14) into
different group, then you can install two le servers to port 15, port 16, those fourteen
users shall not see each other where they can freely access the information from the
two le server. Or, port 15 is connect to your local server and port 16 up connect to your
networks backbone, either 100 meters (FSD-1600) or 2 kilometers away (FSD-1601, both
DIP 1 & 2 in ON position)
3.3.4 Set up Video/Voice Networks (Model: FSD-1600/1601)
Some networks could have a devices like Video or Voice device like Internet Telephony
Gateway, the support of priority may help you to make your voice or video in higher
position to get the precious networks bandwidth, for example to the Intermet.
If your Voice Gateway support ToS, you may direct turn on the DIP 9 to get the higher
priority, or if your device or network nodes do not support you can turn on DIP 11 or DIP
12 to have the hardware priority,
Figure 3-4 3 Voice Gateway to Switch Connection