Filter
Top Products
14
STEP 5: Please take VIP-192 and setup the wireless network to connect with IP
PBX (IPX-300W) by keypad menu method. Then log in VIP-192 via web browser
and browser to “SIP Settings” conguration menu. Insert the Register and
Outbound Proxy IP Address information.
The IP address
of IP PBX
Figure 17. SIP settings of VIP-192
Then browse to “SIP Account Settings” conguration menu and ll in the account/
password information. The sample conguration screen is shown below:
Data match with Figure 15. IP
PBX’s extensio n settings
Figure 18. SIP account settings of VIP-192
STEP 6: After both of devices have registered to IP PBX successfully, it could
browse to “Information ⁄ PBX Extension Status” page to show the registration
status:
Figure 19. Extension status
Test the scenario:
1. VIP-154T pick up the telephone
2. Dial the number: 100 (VIP-192) shall be able to connect to the VIP-192