Planet Technology IPX-300 Series Network Card User Manual


 
9
Figure 7. Wizard-Internet settings
AP Setting (For IPX-300W)
For conguring correctly the WLAN port in client mode, the below instructions will
provide a quick start. It is advised if possible to use the simplest network settings
for rst try.
For making sure the IP PBX is connecting to your wireless router (AP). You need
to set up the following: SSID, Frequency Channel, Authentication method and
Encryption parameters (Type/Encryption length/Keys.)
Figure 8. Wizard-AP settings
Step3. NAT Setting
LAN IP Setting
LAN IP Address
Private IP address for connecting to a local private
network. (Default: 192.168.0.1)
Subnet Mask
Subnet mask for the local private network (Default:
255.255.255.0)