Filter
Top Products
LED Display & Button
1 PC
RJ-45 connector, to maintain the existing network structure,
connected directly to the PC through straight CAT-5 cable
2 LAN
RJ-45 connector, for Internet access, connected directly to
Switch/Hub through straight CAT-5 cable.
The LAN interface also can be connected with 802.3af PoE
switch or converter for power supply (VIP-156PE)
3 12V DC
12V DC Power input outlet
4 Reset
Reset to the factory default setting
ÍNote
Machine default IP is http://192.168.0.1. Press RESET
button on rear panel over 5 seconds will reset the VoIP Phone
A
dapter to factory default value. (Except speed dial and
call forward settings)
LED display of VIP-156 / VIP-156PE
LED Indicators Descriptions
PWR
Power is supplied to the device.
STATUS
The Status LED will be flashing when the machine is operational
LNK/ACT
OFF: the device is connected to LAN at 10Mb/s.
ON: the device is connected to LAN at 100Mb/s.
RING
OFF: the phone is idle.
ON: the phone is in use (offhook).
Blinking: the phone is ringing.
11