Filter
Top Products
Raidtec FS3102 Hardware Installation Guide Version 1.0 16
6 Installing the FS3102 system
6.1 Installing Disk Drives
Note: Disk drives do not have to be installed in any particular sequence when setting up the FS3102.
Slide the lock release button to the right to release the drive tray handle, (see Figure 6-1). Using the drive tray
handle, insert the drive tray into the system with the disk facing up (see Figure 6-2). Push the drive tray all the way
in to the system and close the drive tray handle to engage the connector.
Figure 6-1
Figure 6-2 Drive Inserted half way in to System
Note: The drive handle mechanism is the same for both drive and dummy shuttles.
6.2 Installing SFPs (Optical transceivers)
The SFPs (Figure 6-3) are fitted to the Fibre Channel controller ports at the factory prior to shipping.
Figure 6-3 – SFP
Lock Release Button
Drive Tray Handle