Filter
Top Products
Raidtec FS3102 Hardware Installation Guide Version 1.0 26
Alert Messages
The following Notifications and Warnings are sent by the controller.
Notifications
Normal operation of power supply in slot <number> restored
Normal operation of fan in slot <number> restored
The temperature in the system is now within the acceptable range
Creating RAID ‘<name>’, useable capacity: <capacity> GB
RAID ‘<name>’ is now accessible
Initialising RAID ‘<name>’
Initialisation of RAID ‘<name>’ deferred for a higher priority RAID
RAID ‘<name>’ initialisation complete
Deleting RAID ‘<name>’
Expanding RAID ‘<name>’ by adding rows
Expanding RAID ‘<name>’ by adding <number of columns> column(s)
Initialising expansion space on RAID ‘<name>’
RAID ‘<name>’ expand complete
Rebuilding RAID ‘<name>’
Rebuild of RAID ‘<name>’ deferred for a higher priority RAID
RAID ‘<name>’ rebuild complete
Disk in bay <number> is no longer part of RAID ‘<name>’
Verifying RAID ‘<name>’
Verification of RAID ‘<name>’ deferred for a higher priority RAID
RAID ‘<name>’ verification complete
Logical volume '<name>' created
Logical volume '<name>' deleted
Logical volume '<name>' capacity expanded to <capacity>
Logical volume '<name>' ID:LUN changed to <SCSI ID>:<LUN>
Logical volume '<name>' changed to '<new name>'
Starting Firmware <version> (<build time and date>) reboot <reboot count>
Network up at IP address <IP address>, netmask <netmask>
Password has changed
Fibre Channel Port <port> is up at <speed> Gb in <fibre channel mode> mode
Warnings
Disk in bay <number> is missing
Disk in bay <number> has excessive errors
Disk in bay <number> is running out of reallocation blocks
Disk in bay <number> has run out of reallocation blocks
Disk in bay <number> has failed
Power Supply Module in slot <number> is not working properly
Fan in slot <number> is not working properly
The temperature in the system has exceeded <threshold value> threshold
The temperature in the system has dropped below 10C/50F
RAID ‘<name>’ initialisation failed to complete
RAID ‘<name>’ verify failed to complete
RAID ‘<name>’ expand failed to complete
RAID ‘<name>’ rebuild failed to complete
RAID ‘<name>’ is degraded due to disk failures
RAID ‘<name>’ is inaccessible due to disk failures
RAID ‘<name>’ has no suitable spare available
Cannot start scheduled verify on RAID ‘<name>’
Controller hardware error
Firmware download checksum failed, the binary may be corrupted
Firmware ID does not match, the binary is not for this product