Filter
Top Products
Raidtec FS3102 Hardware Installation Guide Version 1.0 17
In the event that the SFPs need to be changed, carry out the following procedure’s while referring to Figure 6-4
Figure 6-4
6.2.1 SFP Removal
1. Remove the SFP from the controller by lowering the SFP handle to the down position.
2. Gripping the handle, slide the SFP out from the controller fully.
6.2.2 SFP Replacement
1. With the SFP handle in the lowered position, align the SFP to the controller port and insert fully until you
feel the connector engaging.
2. Turn the handle up until it clicks to the home position (ref: Figure 6-5)
Figure 6-5
6.3 Installing a Host Bus Adaptor (HBA)
Install the prescribed host bus adaptor in the host computer using the documented procedure supplied by the host
computer manufacturer.
Controller
SFP
SFP Handle
SFP