Filter
Top Products
E-59
Replacing the Lamp Cartridge
Preparations: Turning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched makes it easier to
replace the lamp cartridge. Turn the projector right-side up after replacing the lamp cartridge.
1
Unplug the power cord.
2
Turn the projector upside-down.
3
Remove the lamp cover.
(1) Loosen the lamp cover locking screw by turning it counter-
clockwise until it turns freely. (The screw will not come out.)
4
Remove the lamp cartridge.
(1) Loosen the 2 screws of the lamp cartridge by turning them
counterclockwise until they turn freely. (The screws will not
come out.)
(2) Grasp the handles of the lamp cartridge and pull upward to
remove the cartridge.
(2) Pull in the direction of the arrow and remove.