Filter
Top Products
E-22
PC
VIDEO
AUDIO
CrCbY
PrPbY
COMPONENT
COMPONENT
Connecting Personal Computers and Video Equipment
Connections with Component Signals
When the Video Connectors are Y, Cb, and Cr Connectors
* Make the connection to the projector's VIDEO connector using a component signal cable.
* Switch the input selection of the projector to "YCbCr".
When the Video Connectors are Y, Pb, and Pr Connectors
* Connect a DVI/mini D-sub 15-pin conversion cable to the PC connector of the projector, then make a
further connection using a component cable (which is available as an option).
* Switch the input selection of the projector to "YPbPr".
DVI/mini D-sub 15-pin conversion
cable (Supplied item)
DVD player, HD video
deck, etc.
Component cable (Available as an option)
(D-sub 15-pin to RCAן3)
(Order code: 28-690)
Note
YCbCr cannot accept the input of signals other than NTSC 3.58 and PAL.
Component cable (Available as an option)
(3.5 mm diameter, 4 Pde, Plug to RCAן3)
(Order code: 28-698)
Green
Blue
Red
Blue
Red
Green