PLUS Vision V-1100Z Projector User Manual


 
E-30
General Operation
Selection of Aspect Ratio
This function selects horizontal and vertical picture propor-
tions of the input signal.
Press the ASPECT button while viewing the projected image
and select the aspect ratio.
Personal Computer Image
(when selecting digital RGB or analog RGB)
Each press of the ASPECT button advances the selection one
step in the sequence of Auto Direct Real, and then repeats.
Auto............ Automatically enlarges or reduces the image to project a
full screen in a ratio of 4:3
Direct .......... Maintains the aspect ratio and projects a picture of the maxi-
mum displayable size
Real ............ Projects the input signal without pixel conversion
Image of the Video Equipment
(when selecting VIDEO, S-VIDEO, YCbCr, or YPbPr)
Each press of the ASPECT button advances the selection one
step in the sequence of Auto Wide Zoom, and then repeats.
Auto............ While maintaining the aspect ratio, projects a full screen so
that no portions extend beyond the boundaries of the screen.
The top and bottom of the 16:9 image becomes black.
Wide ........... Projects to fill the full width with the entire image at 16:9.
Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the
screen.
DIGITAL RGB YPbPr
VIDEO S-VIDEO YCbCr
QUICK
CANCEL
MENU
ASPECT AUTO
Note
Please note that using this monitor for the purpose of commercial gain or the attraction of public attention in a
venue such as a coffee shop or hotel and projecting a 4:3 screen in wide mode or leaving a squeezed screen as a
compressed image raises concern about the infringement of copyright rights which are protected by copyright
law.