Filter
Top Products
20
Printing steps
Note: If the Direct Connect LED indicator displays
flashing orange before or during these steps, the Color-
Shot Photo Printer is out of film. When this happens,
load a new pack of film as shown in Figure 9. (The film
cover ejects when you close and latch the film door.
1
Turn on the camera.
See your camera instructions.
2
Set the camera to the PC Connect mode. (Your camera
may use a different name for this mode.)
The adapter LED shows a steady orange, indicating
communication among the adapter, camera and printer.
3
To print ... Then ...
a single picture
a
Press the Picture Select
button on the Direct Con-
nect adapter to scroll
through the pictures until
the one you want to print
appears. (Press the button
twice rapidly to scroll
backward.)
b
Press the Single Print But-
ton.
Figure 9. Loading the ColorShot Photo Printer