Filter
Top Products
10
Start the configuration software.
a
Click Start and then click Programs.
b
Click Direct Connect Configuration Software
The main window opens.
The LED indicator on the adapter changes from flash-
ing red to steady orange, indicating that the adapter and
computer are communicating. If the indicator is not
steady orange, see Solving problems on page 22.
Select a camera.
Note: The Direct Connect adapter can be set up for
only one camera at a time. If you have multiple adapt-
ers set up for different cameras, you may want to label
each adapter to indicate its current setup.
a
Click the Camera button to display a list of compatible
digital cameras.
If you do not see your camera listed, see Obtaining
configuration files for additional cameras and printers
on page 29.
b
Click your camera model and then click the OK button to
send the camera setup information to the adapter.
3
4