Filter
Top Products
Complete the Equipment Installation
9
Complete the Equipment Installation
Connect the IR receiver for the wireless keyboard to the Polycom Instructor RP system.
1. Find the IR receiver in the back of the
Polycom Instructor RP system. The cable for
the receiver is already connected to the
system.
2. Unwrap the IR receiver.
3. Stick the Velcro® to the top of the receiver
and to the bottom of the video conferencing
shelf.
4. Attach the IR receiver to the bottom of the
video conferencing shelf.
For more information about the IR receiver and
wireless keyboard, refer to the Sejin Electron Inc.
User’s Manual for Windows 95/98 Freeboard
document.
Reinstall the cabinet’s rear access panel and close the front doors.
For more information, refer to the “Removing the
Rear Access Panel” section of the Rear Projection
SMART Board 3000i Installation Guide.
1
Note If you do not want to attach the IR
receiver to the bottom of the video
conferencing shelf, you can attach it
elsewhere. Just be sure that there are no
obstacles blocking the IR transmission
from the keyboard to the receiver.
2