Filter
Top Products
Configuring the SpectraLink 8000 SVP Server
PN: 1725-36031-001_H.doc
2
7
To change the IP address of the master SVP Server, change it in
this menu and reboot the system. Then you may change alias IP
addresses in each of the other SVP Servers without error.
The following options must be configured:
IP Address
Enter the IP address of the SVP Server, defined by your network
administrator. Enter the complete address including digits and
periods.
DHCP may be entered.
A master SVP Server must have a static IP address.
The SVP Server will automatically lock for maintenance if the IP
address is changed. When this
Maintenance Lock occurs, the SVP Server
must be reset upon exit. All active calls are terminated during a reset.
Hostname
(Optional) change the default host name, if desired. This is the name
of the SVP Server to which you are connected, for identification
purposes only. You cannot enter spaces in this field.
The host names for each SVP Server and OAI Gateway on the
system must be unique.
Subnet Mask
The network administrator must define the subnet mask.
Default Gateway
The IP address of a router on the local subnet.
SVP-II TFTP Download Master
This entry indicates the source of software updates for the SVP Server.
See Chapter 5 Software Maintenance for more information. Valid source
location entries are:
• NONE: disables.