Filter
Top Products
Configuring the SpectraLink 8000 SVP Server
PN: 1725-36031-001_H.doc
35
When forwarding packets, the SVP Server shall always overwrite the
received DSCP value. The final DSCP tag for packets in each of the
traffic classes are assigned a DSCP value based on the following rules.
(Please see table below.)
• If both Administration and the Traffic Class setting is Default, the
Default value as shown in the table below will be used.
• If Administration is set at any number (Value X) other than Default,
that setting (
Value X) it will override the Default value of the Traffic
Class.
• If any of the
Traffic Class settings are set at any value (Value Y)
other than
Default, that setting (Value Y) will override the
Administration setting.
Administration
Traffic Class
Default Value X
Default 4 X
WT (In call)
Priority High
Value Y
Y Y
Default 0 X
WT (Standby)
Priority Med
Value Y
Y Y
Default 4 X
RTP
Priority High
Value Y
Y Y
Default 0 X
PBX
Priority Med
Value Y
Y Y
Default 0 X
Inter-SVP2
Priority Med
Value Y
Y Y
Default 0 X
Administration
Priority Low
Value Y
Y Y
Default DSCP settings will mark traffic for Best Effort handling
under normal circumstances. Please consider changing these
values based on the recommended QoS settings from your network
hardware manufacturer to prioritize your voice traffic.