Polycom 4300T Network Router User Manual


 
Configuring the 4300T
3 - 7
Configuration Guide For Trunk Side IP PBX Applications
Companies with existing IP-based WAN links for inter-office voice and data
communications can use the 4300T as a traffic shaper to meet the stringent
jitter, latency and packet loss requirements for toll quality voice. The 4300T is
deployed at the edge of the WAN in both headquarters and branch office
locations, as shown below.
static IP routing Optional
Firewall Configuration enable the data firewall Yes
configure basic settings Optional
configure advanced settings Optional
Traffic Management
Configuration
enable traffic shaping Yes
enable Call Admission Control Optional
VoIP Survivability enable VoIP survivability Yes
configure call processing server reachability
settings
Optional
specify the number of digits to use for local
dialing
Optional
configure the IP address of the local LAN side
PSTN gateway
Optional
configure call processing server redundancy Optional
Frame Relay
Or
IP Network
IP PBX
IP PBX
IP PBX
Branch Office
Headquarters
Branch Office
4300T
4300T
T1/E1
T1/E1
4300T
EM005