Configuring the 4300T
3 - 9
Configuration Guide For Hosted Video Applications
A typical 4300T installation for hosted video applications is depicted in the
diagram below. In this scenario, the 4300Ts are used to connect all of the video
endpoints to the Gatekeeper. The video endpoints should be configured to
point to the LAN address of the 4300T as the Gatekeeper and the 4300T will
proxy RAS and call setup messages to the Gatekeeper
The 4300T is installed at the customer premises and is used as a demarcation
point for the video service by providing the following functions:
• WAN/LAN IP routing.
NMS
5300-E
H.323 Video
Endpoint
H.323 Video
Endpoint
Softswitch
5300-S
Public IP
Network
PSTN
Aggregation Router
Aggregation
Router
SIP Voice
User
NAT/Firewall
4300T
V500
Laptop
IP
Phone
IP
Phone
Hotspot
Service Provider
Company A Company B
T-1/E-1 NxT-1/E-1
Gateway MCU
PSTN
ISDN,
PSTN Network
H.323
Gatekeeper
Gateway
EM008B