Filter
Top Products
Configuration Guide
Configuration for SpectraLink Wireless Telephones
running in 802.11a mode
1. From the main menu, click Wireless.
2. In the navigation pane, under
Access Points select Radios, then
select
802.11a /n. All the APs that are connected should be listed,
showing their
Operational Status as UP.
3. Select
Configure from the drop-down list for the access point you
wish to change.
Global settings for RF Channel Assignment and Tx Power Level
Assignment were not tested during VIEW Certification. For Custom
Tx Power and RF Channel settings please consult your facility’s RF
site survey — optimized for wireless voice traffic — to determine
correct power and channel settings for each AP using non-
overlapping channels.
PN: 1725-36070-001_P.doc
16