Filter
Top Products
Configuration Guide
8. Under the Security tab, select the desired security policy (either
WPA or WPA2) and enter all required options.
9. Under the
QoS tab, set Quality of Service to Platinum (voice).
(Note: This is the required setting for voice traffic.)
10. Set
WMM Policy to Disabled. (Note: This is required for usage with
SpectraLink Wireless Telephones.)
11. Click the
Apply button to save all changes.
WEP was not tested during VIEW Certification. WEP is supported
by both the LWAPPs and the SpectraLink Wireless Telephones.
PN: 1725-36070-001_P.doc
22