Chapter 1-Hardware Description
1-10
• Using a shelf
— Install the shelf supplied by the rack manufacturer, in the rack.
— Mount the RMX
on the shelf.
— Fasten the RM
X to the rack with screws through the four holes in
the RMX’s front mounting brackets.
Connecting the RMX 1500 to a Power Source
The following restrictions apply to the conductors and connectors that
may be used to ground the unit when rack mounted:
• When using bare conductors, they must be coated with an
appropriate antioxidant
compound before crimp connections are
made. Tinned, solder-plated or silver-plated connectors do not have
to be prepared in this manner.
• The same bolt assemblies should not secure multip
le connectors.
• Listed fastening hardware must be compatible with the materials
being
joined and must be preclude loosening, deterioration and
electrochemical corrosion of the hardware and joint materials.