Filter
Top Products
13
Problem 2: One of the Portsmith Express ports/peripherals is not
functioning properly.
Upon docking, the status indicator lights on top of the Portsmith Express unit
should turn on. If they do not, follow the steps below.
Step 1:
• Check the desktop for any Portsmith Express error messages.
Step 2:
• Make sure that the peripheral is securely connected to the Portsmith Express
unit.
Step 3:
• Undock the Portsmith Express unit from the laptop PC.
• Remove the problem peripheral from the Portsmith Express port and redock.
• Verify that the ports are displayed correctly in the status indicator and in the
Portsmith Express Monitor Utility. If the port appears normal, then reattach
the peripheral.
Step 4:
• Go to the desktop and double-click on My Computer.
• Double-click Control Panel.
• Double click System.
• Select the Device Manager tab
• Check for any error messages from within Device Manager. If a port has an
error, then try removing the port by selecting Remove and then undocking
and redocking the unit.
• Reinstall the peripheral. (See to “Hardware Setup” on page 4.)