Filter
Top Products
The software running on the POS system does
not support the data format of the barcode
label.
Enter/Exit Programming Mode
Note: Scan this code to enter and exit programming mode.
A slightly enlarged image of this code is also printed on the
last page of this section for ease of application.
PROGRAMMING CODES
All framed barcode names represent as default settings.
Please refer to flow chart illustrated earlier for conceptual understanding.
Please cover the unwanted codes for scanning the specific code required for the
programming to prevent confusion in code scanning.
Use the download file from our web for advanced programming.
Display Firmware Version
Note: The reading of the “Display
Firmware Version” label
will read out the firmware
version and exit the
programming mode.
Abort (Exit programming mode)
Note: The reading of the “ABORT” label
discards all the parameters changed
previously. However the reading o
f
the “Enter/Exit of Programming”
label is still required to exit the
programming mode.
Pa
g
e 11