Filter
Top Products
Part 2
II. CARTON CONTENTS
1. Touch Monitor (Main unit + Adjustable base stand assembly)
2. User’s Manual
3. VGA cable
4. USB cable
5. Power adaptor & power cord(For TM/LM-8115)
(For TM-8315, please refer to the terminals manual to support power
from VGA cable)
6. Posiflex Product Information CDROM
7. Option RS232 cable
III. INSTALLATION GUIDE
TM/LM-8115
Since the monitor and stand are packaged separately,
please take out and hold the PE foams carefully and
DO NOT detach and drop it as show in the
following picture.
After take the PE foam out from the
carton, please remove the PE foam with
extra care and make sure place the
monitor and stand on a soft clean flat
surface such as table and as show in the
picture at the right side.
Please find the four holes in the top of stand.
Take the stand and align these four matching
holes to the four matching pegs which are in the
back on monitor.
After matching the stand and monitor, push the
stand to the arrowed direction as show in the right
picture. At this time, turn the monitor to the normal
position and plug the power then it can start to use.