Filter
Top Products
INSTALLATION
EATON Powerware
®
BladeUPS
®
EBM User's Guide S 164201650 Rev 2 www.powerware.com
18
5. Repeat Steps 3 and 4 for the other rail.
6. Tighten the assembly wing nuts on both rail assemblies.
CAUTION
The EBM is heavy [77 kg (170 lb)]. A minimum of two people are required to move the EBM.
7. Place the EBM on a flat, stable surface with the front of the EBM
facing toward you.
8. If the mounting brackets are not already installed, align the two
mounting brackets with the screw holes on the side of the EBM
and secure with the supplied 6-32 flat-head screws (see Figure 6).
9. Attach the EBM front cover:
Align the pins on the rear of the front cover with the openings in the
EBM. Push the cover firmly into place. See Figure 6.
Mounting
Bracket
6-32 Flat-Head
Screws
Figure 6. Installing the EBM Mounting Brackets
10. Slide the EBM into the rack.