Filter
Top Products
CPD10WALLARM
Page 6
Visit Premier Mounts website at http://www.mounts.com Installation Instructions
Use four (4)
5
16
˝
x 3” lag bolts and four (4) fl at
washers to mount the wall plate to the wooden
studs. Use a ½” socket and socket wrench to
fi nish this step.
Do not overtighten the lag bolts.
Insert and gently tap the wall plate covers into
place.
Proceed to the "Removing the End Cover" section.
½˝ Socket and
Wrench
Lag Bolt and
Flat Washer
X
X
Wood Stud Installation (cont'd)
CPD10WALLARM
M5 x 8mm
Security Screw
End Cover
Locate the end cover.
Remove the M5 x 8mm security screw using a M5
security wrench (supplied).
Discard the end cover.
Proceed to the "Attaching the Projector Arm" section.
Removing the End Cover
Step 5