Filter
Top Products
5.1.1. Re-transfer settings
Ribbon Type Counts per roll (1000, 750)
Temperature -3 (Low) ..Standard + 2 (High)
Speed (Front/Back) -10 (Slow) .. Standard .. +2 (Fast)
5.1.2. Bend remedy
Temperature Off .. -5 (Low) .. Standard .. 0 (High)
Speed -2 (Slow) .. Standard .. +2 (Fast)
Cooling Time 0 sec .. 15 sec
Note: Cooling Time is only available if temperature is not Off.
5.1.3. Ink settings
Ribbon Type YMCK, YMCK + PO, YMCKK
Note: The auto detection function will always show the currently mounted type of color ribbon.
Resin Black -3 (Thin) .. Standard .. +5 (Thick)
Resin Black Mode Normal .. Fine
Special Ink: 1/2
(for future use)
-3 (Thin) .. Standard .. +3 (Thick)
5.1.4. Other settings
ISO Type HiCo or LoCo Magstripe Cards
Card Type Normal or Cybernetic Size (future use)
Printer Stand By No .. 60 minutes
Buzzer On or Off
Prima 2e Driver Manual
Page 41 of 77