Filter
Top Products
8 Ink Cartridges and Printable Media
2. If installing a new, replacement ink cartridge, slowly
remove the tape covering the cartridge’s printhead, being
careful to avoid damaging or removing the barcode label
on the underside of the cartridge.
DO NOT TOUCH THE COPPER AREA!
3. From within the printer driver setup window, click on the
Cartridge button and then on the Change button to move
the carrier to the load position. Note that the printer
driver must be installed and that the printer must be
connected to your computer (see Section 3) in order to
complete this step.
If you prefer, you may instead press the Ink Cartridge
button on the top of the printer.
4. Remove the installed ink cartridge by grasping the top of
the cartridge and firmly pulling it straight toward you.
You will hear the cartridge snap out of position. Remove it
from the printer.
510901.qxd 5/26/2004 11:20 AM Page 8
TOC
INDEX