Filter
Top Products
Using the CD/DVD Printer 6 with Windows 11
Section 3: Using the CD/DVD Printer 6
with Windows
A. INSTALLING THE PRINTER
The CD/DVD Printer 6 can be used with virtually any
Windows application program. This is accomplished by
installing in Windows what is called a “printer driver.” The
printer driver is simply software which gives the printer all the
information needed for printing. Use the following steps to
install the printer driver.
NOTE: This section of the Operator’s Manual assumes that you are already
familiar with Windows and know how it operates. If you are not yet
familiar with Windows, consult the appropriate Microsoft
documentation to become familiar with the basics of Windows
before proceeding.
To install the printer driver into Windows 2000/XP, refer to
the following:
1. Insert the included CD into your computer’s CD-ROM
drive. The installer program should launch automatically
after a few moments. If it does not, click Start > My
Computer then right click on the CD-DVD Printer 6 icon
and select AutoPlay.
2. Click the Quick Install button and follow the on-screen
instructions.
3. Connect the printer to your computer. The printer is
equipped with a standard 4 Pin USB port. This port is the
means through which it receives data from your computer.
To connect the printer to your computer, use the included
USB cable and refer to the following steps:
A. Connect the square shaped side of the USB cable to
the printer.
510901.qxd 5/26/2004 11:20 AM Page 11
TOC
INDEX